GA Pro First Run '50 Alnico 3 Telecaster Pickups
Where the Tele started
In 1950, before anyone had heard the word Telecaster, Fender put out a two-pickup solidbody called the Broadcaster. It was simple, practical and brilliantly designed, and it sounded like nothing else around. Within a year it had been renamed, and that sound went on to become one of the most recognisable in music.

- Magnet
- Alnico 3
- Coil wire
- Heavy Formvar
- Neck
- Approx. 7.5 kΩ
- Bridge
- Approx. 9.2 kΩ
The bridge pickup on those first guitars was something special. It was wound hotter than most of the Tele bridges that followed, which gave it a thick, biting voice that could go from clean country picking to rough-edged electric blues without breaking a sweat.
First Run '50 is our take on that sound. Alnico 3 magnets, Heavy Formvar wire and black fibre bobbins, with the bridge wound to around 9.2k for the weight and attitude those early pickups were known for. The neck is warm and round, the perfect partner for it.

Built the early way
Heavy Formvar is the wire the earliest Fender pickups were wound with. Its thicker insulation spaces the turns slightly further apart in the coil, which players often describe as giving a clearer, more open sound. It's how the originals were made, so it's how we make ours.
Alnico 3 is a gentler magnet than the Alnico 5 that came later. There's less pull on the strings, so they ring out and sustain more freely, and the response is sweet and touch-sensitive in a way that rewards a good picking hand.

On the bridge, the pole pieces are flat rather than staggered, as they were on the first pickups, and the coil is wrapped in black twine. It sits on a copper-plated steel baseplate, which adds a little extra body and midrange and is a big part of the classic Tele bridge sound.
Every pickup is wax-potted so it won't squeal when you turn up, and comes with cloth push-back leads, which makes fitting them easy.

Scatterwound
First Run ’50 is scatterwound. The wire goes on in a varied, slightly irregular pattern rather than in neat, even layers. It’s how pickups were wound in the ’50s and ’60s, when winders guided the wire by hand, and it’s a big part of why those old pickups sound so open.
Spreading the turns out like this keeps the highs clear and lively instead of glassy-harsh, and gives each note a bit more air. We set the wind pattern for each model, so it suits what that set is meant to do.
The bridge
This is the heart of the set. At around 9.2k it has more body and midrange than a typical vintage Tele bridge, but it keeps all the snap and twang you want from one.
Clean, it's thick and punchy, great for country rhythm, rockabilly and early rock 'n' roll. Push the amp and it turns gritty and lively, the kind of sound that makes you dig in that little bit harder.
The neck
Warm, round and smooth, at around 7.5k. It's a lovely contrast to the bridge: mellow clean chords, warm melodic lines, and bluesy leads with the tone rolled back.
Put both on together and you get that bright, slightly hollow middle-position sound that's pure Tele. The neck is reverse-wound and reverse-polarity, so that middle position is hum-cancelling too.
Our take on the first run
We haven't set out to copy one particular vintage pickup. First Run '50 is our take on the earliest Broadcasters, using the traditional materials and giving the bridge the extra weight those first guitars were famous for.
From early country and rock 'n' roll to electric blues and roots rock, it's for players who love a Tele that's raw, direct and full of character.
Seventy-odd years on, it still sounds like the future.

Part of the GA Pro range: our own line of boutique-style pickups, researched and developed in the Guitar Anatomy workshop. Our team works out each design from the ground up, choosing the materials, settling the winds and testing them in real guitars until we're happy with every position.
Technical Specifications
Neck Pickup
- Pickup Type
- Tele-Style Single Coil
- Magnet Type
- Alnico 3
- Pole Pieces
- Not specified
- Coil Wire
- Heavy Formvar (HF)
- Wire Gauge
- 43 AWG
- Bobbin Construction
- Black Fibre
- DC Resistance
- Approx. 7.5 kΩ
- Coil Wrapping
- Not specified
- Baseplate
- Not specified
- Winding
- Reverse Wound, Reverse Polarity (RWRP)
- Hook-up Wire
- Vintage Cloth Push-back
- Wire Colours
- White: Hot / Black: Earth
- Potting
- Wax-Potted
- Included
- Mounting Screws, Springs and Rubber Tubing
- Available Configurations
- Neck, Bridge or Matched Pair
Bridge Pickup
- Pickup Type
- Tele-Style Single Coil
- Magnet Type
- Alnico 3
- Pole Pieces
- Flat, Non-Staggered
- Coil Wire
- Heavy Formvar (HF)
- Wire Gauge
- 42 AWG
- Bobbin Construction
- Black Fibre
- DC Resistance
- Approx. 9.2 kΩ
- Coil Wrapping
- Black Twine
- Baseplate
- Copper-Plated Steel
- Winding
- Standard
- Hook-up Wire
- Vintage Cloth Push-back
- Wire Colours
- Yellow: Hot / Black: Earth
- Potting
- Wax-Potted
- Included
- Mounting Screws, Springs and Rubber Tubing
- Available Configurations
- Neck, Bridge or Matched Pair
DC resistance figures are approximate and will vary slightly from pickup to pickup, and with temperature.
Wiring them in
We have a full range of wiring diagrams to use with your new pickups, from a standard Tele layout to popular mods. You can find them all on our Wiring Diagrams page.
Need some expert advice?
Choosing a pickup or planning your next upgrade? Talk to the Guitar Anatomy team.














































Reviews
There are no reviews yet