GA Pro Texas Dirt ’68 Alnico 5 Strat Pickups
A Strat for a cranked amp
By the late ’60s, the Strat had moved a long way from clean country and rock ‘n’ roll. Players were plugging into valve amps and turning them right up, and the sound of a Strat into a pushed amp was becoming a big part of blues and rock. Over the next couple of decades, Texas players took that sound and made it their own: heavy strings, a heavy right hand and an amp on the edge.

Texas Dirt ’68 is built for playing like that. It’s still a traditional single coil set: staggered Alnico 5 poles, Plain Enamel wire and grey bottom bobbins. The neck and middle are a standard late-’60s wind. The difference is the bridge, which we’ve wound hotter so it has a bit more weight when you dig in.
You keep everything that makes a vintage Strat great, and the bridge gets the extra body and attitude to really hold its own for leads.

What’s different about the bridge
The neck and middle read around 6.5k, which is typical for the period. The bridge is around 6.9k. That extra winding gives more output and a little more midrange, so the bridge sounds fuller and sits better against the other two positions, without losing the clarity and pick response you’d expect from a Strat.

Vintage Correct Bobbins
The rest is the same as our other ’60s-style pickups: Plain Enamel wire, staggered Alnico 5 poles and black and grey fibre bobbins.
Every pickup is wax-potted so it won’t squeal when you turn up, and comes with cloth push-back leads, which makes fitting them easy.
Scatterwound
Texas Dirt ’68 is scatterwound. The wire goes on in a varied, slightly irregular pattern rather than in neat, even layers. It’s how pickups were wound in the ’50s and ’60s, when winders guided the wire by hand, and it’s a big part of why those old pickups sound so open.
Spreading the turns out like this keeps the highs clear and lively instead of glassy-harsh, and gives each note a bit more air. We set the wind pattern for each model, so it suits what that set is meant to do.
How it sounds
Neck
Warm and full. Round and vocal for blues leads, and it sings nicely once the amp starts to break up.
Middle
Crisp and dynamic, with plenty of clarity for rhythm and the in-between positions.
Bridge
This is where the set is different. More body and more bite than a standard vintage bridge, so it works for leads, crunchy rhythm and driven amps without getting shrill.
You still get the snap of a clean Strat. You just get a bit more growl from the bridge when you lean on it. Heavy strings optional, but recommended.
Part of the GA Pro range: our own line of boutique-style pickups, researched and developed in the Guitar Anatomy workshop. Our team works out each design from the ground up, choosing the materials, settling the winds and testing them in real guitars until we’re happy with every position.

Technical Specifications
DC resistance figures are approximate and will vary slightly from pickup to pickup, and with temperature.
Wiring them in
We have a full range of wiring diagrams to use with your new pickups, from a standard Strat layout to popular mods. You can find them all on our Wiring Diagrams page.
Not sure which set to go for?
Choosing a pickup position, a cover colour or your next Strat sound? Talk to the Guitar Anatomy team.































































Reviews
There are no reviews yet