GA Pro Route 99 '63 Alnico 5 Telecaster Pickups
Twang from the Central Valley
In the early '60s, while Nashville was polishing country music up with strings and smooth vocals, Bakersfield, California was heading the other way. The bands playing the honky tonks along Highway 99 were louder, harder-hitting and built around the bright, cutting sound of a Telecaster. It became known as the Bakersfield Sound, and it's still the benchmark for Tele twang today.

- Magnet
- Alnico 5
- Coil wire
- Plain Enamel
- Neck
- Approx. 6.95 kΩ
- Bridge
- Approx. 7.5 kΩ
Route 99 '63 is our take on the Tele pickups of that era. Alnico 5 magnets, Plain Enamel wire and black fibre bobbins, with a copper-plated steel baseplate on the bridge and a brass cover on the neck: the classic early-'60s Tele recipe.
The result is everything that makes a Tele a Tele. Snappy, percussive and clear, with a clean tone that cuts through a band without you having to turn up.

The early-'60s recipe
By 1963, Tele pickups were wound with Plain Enamel wire, and we use the same on Route 99. The neck is wound with finer 43 AWG wire and the bridge with 42 AWG, just as the originals were.
Both pickups use Alnico 5 magnets, which give that quick, immediate attack and firm low end you expect from a classic Tele.

The bridge sits on a copper-plated steel baseplate. It's a key part of the Tele bridge sound, adding body and punch so the bridge never gets thin. The coil is wrapped in white twine and the pole pieces are flat, just like the early-'60s pickups.
At the neck, a plated brass cover smooths off the top end and gives the neck its warm, rounded voice. It comes in chrome or gold to match your hardware.
Every pickup is wax-potted so it won't squeal when you turn up, and comes with cloth push-back leads, which makes fitting them easy.

Scatterwound
Route 99 ’63 is scatterwound. The wire goes on in a varied, slightly irregular pattern rather than in neat, even layers. It’s how pickups were wound in the ’50s and ’60s, when winders guided the wire by hand, and it’s a big part of why those old pickups sound so open.
Spreading the turns out like this keeps the highs clear and lively instead of glassy-harsh, and gives each note a bit more air. We set the wind pattern for each model, so it suits what that set is meant to do.
Photo shows the exposed coil on First Run ’50.
The bridge
This is the classic Tele bridge sound. Wound to around 7.5k, it's bright and snappy, with plenty of twang and a quick, percussive attack.
Clean, it's made for chicken picking, crisp rhythm and the cutting country lead lines Bakersfield made famous. Push the amp into breakup and that clarity turns into a raw, biting edge that's great for blues and early rock 'n' roll.
The neck
At around 6.95k with its brass cover, the neck is warm, smooth and rounded, a lovely contrast to the bridge. It's great for bluesy leads, rich clean chords and smooth, melodic playing.
Put both on together and you get that bright, slightly hollow middle-position sound that's pure Tele. The neck is reverse-wound and reverse-polarity, so that middle position is hum-cancelling too.
One guitar, a lot of ground
Country, rockabilly, blues, soul, classic rock: a good Tele covers all of it, and Route 99 '63 is built to bring out that versatility. Bite and twang from the bridge, warmth from the neck, and the classic blend in the middle.
Turn it up, dig in and let it twang.

Part of the GA Pro range: our own line of boutique-style pickups, researched and developed in the Guitar Anatomy workshop. Our team works out each design from the ground up, choosing the materials, settling the winds and testing them in real guitars until we're happy with every position.
Technical Specifications
Neck Pickup
- Pickup Type
- Tele-Style Single Coil
- Magnet Type
- Alnico 5
- Pole Pieces
- Not specified
- Coil Wire
- Plain Enamel (PE)
- Wire Gauge
- 43 AWG
- Bobbin Construction
- Black Fibre
- DC Resistance
- Approx. 6.95 kΩ
- Cover
- Plated Brass, Chrome or Gold
- Baseplate
- Not specified
- Coil Wrapping
- Not specified
- Winding
- Reverse Wound, Reverse Polarity (RWRP)
- Hook-up Wire
- Vintage Cloth Push-back
- Wire Colours
- White: Hot / Black: Earth
- Potting
- Wax-Potted
- Included
- Mounting Screws, Springs and Rubber Tubing
- Available Configurations
- Neck, Bridge or Matched Pair
Bridge Pickup
- Pickup Type
- Tele-Style Single Coil
- Magnet Type
- Alnico 5
- Pole Pieces
- Flat, Non-Staggered
- Coil Wire
- Plain Enamel (PE)
- Wire Gauge
- 42 AWG
- Bobbin Construction
- Black Fibre
- DC Resistance
- Approx. 7.5 kΩ
- Cover
- None (Open Coil)
- Baseplate
- Copper-Plated Steel
- Coil Wrapping
- White Twine
- Winding
- Standard
- Hook-up Wire
- Vintage Cloth Push-back
- Wire Colours
- Yellow: Hot / Black: Earth
- Potting
- Wax-Potted
- Included
- Mounting Screws, Springs and Rubber Tubing
- Available Configurations
- Neck, Bridge or Matched Pair
DC resistance figures are approximate and will vary slightly from pickup to pickup, and with temperature.
Wiring them in
We have a full range of wiring diagrams to use with your new pickups, from a standard Tele layout to popular mods. You can find them all on our Wiring Diagrams page.
Need some expert advice?
Choosing a pickup or planning your next upgrade? Talk to the Guitar Anatomy team.












































Reviews
There are no reviews yet