GA Pro Golden State ’54 Alnico 3 Strat Pickups
The first Strat pickups
The Stratocaster came out in 1954, and the pickups in those first guitars don’t sound quite like the ones that came after. They used Alnico 3 magnets, Heavy Formvar wire and black fibre bobbins, and they were wound fairly lightly, around 5k. What you get is a pickup that’s sweet and open rather than punchy, with a soft, rounded attack that lets the guitar itself come through. It’s a classic sound with real charm, and once it’s in your ears it tends to stay there.

Golden State ’54 is our version of that pickup. We’ve used the same materials and kept the winds low to get as close as we can to that early-’50s voice: a warm, bell-like neck, a clear middle, and a bridge with some snap but no harshness.
Golden State is wound for clarity and feel rather than raw output. It cleans up beautifully when you roll the volume back, and it responds to every change in how hard you pick, so the guitar feels alive under your hands.

Alnico 3 and Heavy Formvar
Alnico 3 is a gentler magnet than Alnico 5. In a Strat pickup that means less pull on the strings, so they ring out and sustain more freely, with a sweet top end and a relaxed, forgiving low end. Fender used it right at the start before moving to Alnico 5.
Heavy Formvar is the wire those early pickups were wound with. The insulation is thicker than Plain Enamel, so the turns sit a little further apart in the coil. Plenty of players say that gives a clearer, airier sound, and it’s exactly how the originals were made. That’s why we use it.
Every pickup is wax-potted so it won’t squeal when you turn up, and comes with cloth push-back leads, which makes fitting them easy.
Scatterwound
Golden State ’54 is scatterwound. The wire goes on in a varied, slightly irregular pattern rather than in neat, even layers. It’s how pickups were wound in the ’50s and ’60s, when winders guided the wire by hand, and it’s a big part of why those old pickups sound so open.
Spreading the turns out like this keeps the highs clear and lively instead of glassy-harsh, and gives each note a bit more air. We set the wind pattern for each model, so it suits what that set is meant to do.
How it sounds
Neck
Warm and round, with that bell-like quality on a clean amp. Good for blues, slower melodic playing and anything where you want notes to bloom.
Middle
Clear and even. Great for clean chords, and on its own or in the in-between positions.
Bridge
Bright, snappy and full of character. Perfect for early rock ‘n’ roll twang and rockabilly lead lines.
They’re at home with rockabilly, early rock ‘n’ roll, clean blues, and vintage clean tones in general. Plug into a clean amp with a splash of spring reverb and you’ll hear what we mean.
Part of the GA Pro range: our own line of boutique-style pickups, researched and developed in the Guitar Anatomy workshop. Our team works out each design from the ground up, choosing the materials, settling the winds and testing them in real guitars until we’re happy with every position.

Technical Specifications
DC resistance figures are approximate and will vary slightly from pickup to pickup, and with temperature.
Wiring them in
We have a full range of wiring diagrams to use with your new pickups, from a standard Strat layout to popular mods. You can find them all on our Wiring Diagrams page.
Not sure which set to go for?
Choosing a pickup position, a cover colour or your next Strat sound? Talk to the Guitar Anatomy team.





























































Reviews
There are no reviews yet