Stratocaster Compatible Pro Roasted Flame Maple and Rosewood Guitar Neck Unfinished Paddle Headstock

Stratocaster Compatible Pro Roasted Flame Maple and Rosewood Guitar Neck Unfinished Paddle Headstock

Building your dream guitar? Here we have a stunning roasted flame maple Guitar Anatomy Pro Series Strat Neck. This unfinished half-paddle neck features a more modern 12″ fretboard radius and uses our new Pro Series fret installation technique that allows for perfectly spherical rounded fret ends.

We have decided to leave this neck unfinished and with a half-paddle headstock to allow you to have more flexibility with your project. All of our necks also come with bone nuts and a two-way truss rod installed.

This neck has a heel designed to fit a Stratocaster body however we do have the same neck available with a heel to fit a Telecaster.

We would recommend a boiled linseed oil finish on the neck like this to get a really fast-playing smooth finish. Almost any finish can be used though. Applying the finish to these unfinished flame maple necks is particularly satisfying as it’s when you get the opportunity to truly see the grain come to life.

With this neck, we decided to go with a 2 piece construction as this further enhances the stability of the roasted maple making an ultra-stable neck.

What is Roasted Maple? 

Our roasted maple necks undergo a special kiln drying process which involves heating the wood to over 200 degrees in a special kiln, removing the moisture from the wood. This process vulcanizes the wood, making it stronger. The big advantage is that after this process, the wood becomes much less susceptible to moisture and climate changes, resulting in a more stable and predictable piece of wood.  This is great for necks, especially, and will minimize the need for adjustments between seasons and different weather conditions.  An extra added bonus from this process is that, while stabilizing figured maple, which is typically not so stable, it also greatly enhances the colour and figure in the wood.  The finished product usually looks stunning, has improved tone and increased sustain!

All of our necks also come with bone nuts and 2-way truss rods installed.

This neck is perfect as an upgrade or if you are building your own parts caster. No expense has been spared in terms of the materials used in this amazing neck.

This is a limited run so get yours before they are gone!

Heel Width: 55.6mm (A perfect fit for our bodies)

Machine Head Holes: 10mm

Nut Width: 42mm

Radius: 12″

Profile: Modern C

Finish: Unfinished

Frets: 22 Stainless Steel Frets – Medium Jumbo

Heel Depth: 25.6mm with fretboard

Width at 1st fret: 20.8mm

Width at 12th fret: 24mm